Map ?
Tap zones to select which to mow, then press Start mow in the bar at the bottom of the screen. Nothing selected = mow all. Use Use Multiple Maps (toolbar above) to mow zones across more than one map. ?
Remote control ?
⚠️ Spinning blades. Arrows unlock only when the camera is live. Keep the area clear.
📱 Rotate your phone to landscape for fullscreen camera + controls.
Mower settings ?
💡 Toggle the lights from the light icon on the camera (upper-left), or in Settings → LED.
Solid chips = completed mows (colored by freshness). Dashed 🗓 chips = upcoming scheduled mows — tap one to edit. Same-day tasks run in sequence; timed tasks wait for their own start time ('no fixed time' chains immediately).
Everything advanced in one place — tap a heading to expand it. Nothing here changes how the mower runs.
Mowing history
Mowing history ?
Lifetime totals ?
Recent mows ?
Diagnostics
Motor & blade status ?
Toolkit computer
RTK / GPS
Network / cellular
Everything (all decoded fields)
Logs
Battery & charging ?
Event log ?
Telemetry history ?
Firmware field scan ?
Map-config scan asks the mower for its current map and lists, for every zone, the settings that zone stores on its own (path spacing, pattern, angle, perimeter) next to the settings it will actually mow with — so you can see exactly which zones use their own settings and which follow the global ones. Blade scan looks for a speed/temp/current stream. Copy results back.
Copy settings to other mowers ?
Two-Factor Authentication ?
Checking…
Warnings & errors ?
The mower reports numbered errors (it has stopped) and warnings (something is off, it may still be running). This panel decides what the toolkit does about each one: whether to pause, whether to restart the mow, and how many times to try.
Acts on the mower's work status AND its blade/motor fault codes. It pauses on Error / Emergency-stop (motor stopped), Escaping (stuck / resistance), or a blade fault (jammed, stuck, over-current, over-temp, comm lost) — the last catches a stopped cutter even when the status still reads "Mowing". Hard blade faults are held for you to restart; resistance/jams can auto-resume (waits your delay, sends Resume, retries). Runs in the background service, so it works with no app open.
Everything is restarted unless you switch it off here. Off means the mower stops and waits for you — you are still alerted, it is just not restarted automatically.
Configured on the Map tab: 🛰 Precision heat ⚙️ (pause on degraded precision, per-zone/channel limits, dock grace) and 📡 Link heat ⚙️ (pause on link drop/weak) — where your zones and channels are visible and selectable.
Maps — back up & restore ?
Remote control & connectivity ?
Remote control over WiFi / cloud is always active (this app uses it). Use the button to toggle the mower's 4G / cellular link (airplane mode on/off).
Camera — signal levels ?
Right now: —
Drive at night with lights ?
Lights come on automatically only while the mower is mowing or driving inside this window, and turn off when it leaves the window or stops. The Toolkit must be running. Turn the light on/off by hand any time with the 💡 button on the camera (Remote or Overview).
Auto-recharge ?
Phone & remote access ?
🌍 Works away from home too — free, automatic, no login or router setup. Scan the QR to open it on your phone and save it as a home-screen icon.
Home Assistant ?
Sends live mower state to your own MQTT broker. Home Assistant discovers it automatically and creates a device with sensors — no YAML to write. Needs an MQTT broker (the Mosquitto add-on is the usual one).
Setup Home Assistant ?
Adds the MQTT integration, a camera for this mower, and a ready-made dashboard. Anything already set up is left alone.
Needed for the dashboard's buttons and the remote controls. Turn it off for readings only — your broker's credentials can command the mower while this is on.
Phone notifications ?
Broker settings (advanced) ?
Advanced topics ?
Updates ?
Checking…
Time zone ?
—
Language ?
Translations are community-reviewed. Something reads wrong? Suggest a better wording.
Units ?
Off = Metric (mm / m·s). Display only — doesn't change anything on the mower.